> ## Documentation Index
> Fetch the complete documentation index at: https://docs.autocalls.ai/llms.txt
> Use this file to discover all available pages before exploring further.

# AI Advisor

> What the advisor banner is telling you, and when to act on it.

The **AI Advisor** looks at how your assistant is set up and points out settings that are likely to
hurt your calls. It runs on its own — you do not have to ask for it.

## Where you see it

* A banner at the top of the assistant: *N settings could be improved*, with **View & fix**
* A number on the **AI Advisor** button in the header, counting the open recommendations

## What is inside

<Tabs>
  <Tab title="Recommendations">
    What the advisor thinks is worth changing on this assistant right now, each with the reason and
    the value it suggests. **Fix** applies one, **Fix All** applies them all.
  </Tab>

  <Tab title="Troubleshoot">
    Symptoms you might be hearing on calls — the assistant talks over people, it misses what is
    said, calls do not end — with the settings behind each one and an **Apply Fix** button.
  </Tab>

  <Tab title="Best Settings">
    The settings we recommend for each engine, so you can line yours up with them.
  </Tab>
</Tabs>

Before anything is applied you see **Changes that will be applied**, listing each setting and its
new value.

## It is advice, not a blocker

A recommendation never stops you from saving, and a setting the advisor dislikes can still be the
right one for your use case. It is not the same as the red **Needs attention** strip, which lists
things that must be fixed before the assistant can be saved.

<Note>
  Applying a fix changes the setting in the builder, the same as editing it by hand. It goes into your
  unsaved changes, so review it and press **Save assistant**.
</Note>

## When there is nothing to say

If your setup looks fine the panel says **All settings look good!** and the badge disappears. That
is the normal state for a tuned assistant — the banner is not something you have to keep at zero.